The safety of a car could become a real headache unless the protection measures that are applied provide calm and tranquility. Among other measures, currently, the one that is probably the star is an alarm with direct notification to the mobile since in the event of any theft attempt or direct attack on the integrity of the car it is detected practically at the moment thanks to this sophisticated and highly advanced alarm system.

Reasons to install an alarm in the car with notification to the mobile phone

Undoubtedly, a car alarm is the best option to always provide its owner with peace of mind, being able to install a basic alarm or opt for a modern alarm system that will guarantee to know at all times if the vehicle is at risk in real-time.

The new car alarms with mobile alerts provide all these guarantees and also thanks to their GPS tracking system and the sensors for each part of the car, they prove this system as a practically perfect combination to ensure the safety of the vehicle.

It must also be taken into account that these systems are highly accurate and efficient, to the point that some installable systems can even turn off the car’s engine through a simple SMS thanks to its GPS locator.

Furthermore, of course, this type of alarm notifies its owner if someone is starting the vehicle without their prior consent, and even some systems installed with mobile notification can establish a gasoline supply cut-off schedule after a small number of kilometers to that in case of theft the vehicle cannot move to a distant place.

Most systems also include an automatic connection with an “Alarm Reception Center” in the event of any urgency of theft or accident.

Putting all these functionalities in the balance, it is more than possible that installing an alarm in the car with direct notification to the mobile phone may be worth it because although sometimes the theft cannot be prevented, the opportunity to recover it is very high thanks to this tracker that incorporate

There is no doubt that technology today already offers many very strong reasons for having this type of car alarm.

How do you connect the car alarm to the mobile phone?

Smartphones are connected through an application to a locator and anti-theft device and it is also possible to manually configure the car alarm with mobile notification.

Of course, you need a good internet network and an automatic response option, as well as a high-quality microphone and good reception even in times of poor signal.

As a suggestion, it is advisable to choose a card to insert into the anti-theft phone from an operator with good coverage in the area and the connection must also work in “roaming” (“data roaming”) if the stolen car is abroad. Of course, the phone number must be secret and the SIM can even be prepaid (looking for the best rates).

It is necessary to know and keep in a safe place the IME code of the mobile (15-digit code that identifies the phone and that allows the SIM to be blocked in case of theft or loss of the terminal). This IMEI code is normally printed on a label inside the mobile and can also be retrieved through the device’s operating system using its settings menu.

Once the card has been inserted into the device and its operability has been checked, connecting the car alarm to the phone is done by following some very simple steps of the application that are sufficiently automated so that the user does not have problems carrying out this activity.

The operation of the alarm is verified with a test phone call from outside the car, with the sending of a text message waiting for an automatic response.

In the event of theft of the vehicle, the alarm system automatically goes into action, immediately notifying its owner of the fact in question so that the police can be called to explain what is happening and the position tracking that is being carried out on the vehicle. vehicle with the functionality installed, and thus be able to proceed with its location and recovery.

On the market, there are multiple car alarm systems with connection to the mobile, although the mounting possibilities and accessories are immense also depending on the car in question that you want to protect, and we believe that to decide the type to install in each case, It is best to go to a specialized installation center for this type of device and understand which system should be installed. There are no better systems to detail since this will always depend on the model of the car and the needs and desires of the user.

Install a car alarm with a camera

It can also be installed in the car if an anti-theft alarm is desired that is equipped with a camera, which is the perfect solution to be able to see images with the user’s mobile device.

Of course, this will further enhance the concept of security since it offers visual information that is also perfectly recordable, and that completes all the previous concepts that are received through all the alarm sensors.

Of course, the reversing cameras that the vehicle has can be integrated into the alarm camera to adapt them to the anti-theft system, complementing the cameras that record the person driving and/or the outside itinerary.

The post Car Alarms With Mobile Notification appeared first on Schmicko Mobile Car Detailing & Car Care.

When evaluating a battery for an electric vehicle, the following main parameters must always be taken into account:

Life cycle: These are the maximum charge and discharge cycles that the battery can withstand until it needs to be replaced. The more cycles, the longer the battery life.

Cost: the influence of the price of the vehicles.

Energy density: it is the energy that can be supplied for each kg, it is measured in Wh/kg, and the higher the density, the greater the autonomy of the vehicle.

Efficiency: It is measured in % and it is the true performance of the battery, that is to say, the energy that it uses.

Power: it is the capacity to provide power (maximum amperage), it is measured in W/kg, and more power better performance.

Next, we detail the different types of electric car batteries that are currently used:

lead-acid battery

It is the oldest of all since it was invented in the 19th century and is still alive with hardly any modifications, although it is not ideal for electric vehicles.

Specifications:

Low cost, ideal for starting, lighting, or electrical support functions.

It is used as an accumulator in small vehicles.

Excessive weight.

Lead toxicity.

Slow recharge.

They offer between 6 and 12 volts.

They can offer up to 100 km of autonomy in hybrid mechanics.

Very limited life with 500 to 800 charge and discharge cycles.

Very low energy density.

It requires periodic maintenance.

Nickel-cadmium battery

The high cost of its components means that it is not the majority solution in the manufacture of electric vehicles, which is why it is more oriented toward airplanes, military vehicles, and helicopters, due to its great performance at low temperatures. It is used only in electrified vehicles.:

They have a memory effect, so their capacity is reduced with each recharge.

Remarkable useful life, with 500 to 2,000 charge and discharge cycles.

Limited energy density.

It requires some care and maintenance.

Quite a high price.

High temperatures cause them to degrade precipitously.

Quite polluting.

Limited technical capabilities.

Nickel-iron battery

Patented in 1903 and developed by Thomas Edison, they are currently mounted only in vehicles of low power and efficiency, although they have an energy density similar to that of lead acid.

Nickel metal hydride battery

Similar to nickel-cadmium, but with better capacity and less environmental aggression, which is why it is well accepted among hybrid vehicles.

They require constant maintenance.

Significant deterioration at high temperatures.

High discharge currents or overloads, but they do not withstand strong energy discharges or high charging currents.

They generate too much heat and recharge slowly.

Lifetime limited with 300 to 500 charge and discharge cycles.

Interesting energy density.

Lithium-ion battery (LiCoO2)

They are currently preferred by electric automobiles due to their high specific energies, high efficiency, the elimination of the memory effect, lack of maintenance, and ease of recycling Lithium-Ion waste, although they are still in the development process.

Twice the energy density of nickel-cadmium batteries, with a size on the order of a third smaller.

They offer good autonomy.

High production cost, although little by little this is being reduced.

They are fragile.

They can explode from overheating and must be stored with great care.

Good levels of useful life with 400 to 1,200 charge and discharge cycles.

They do not require any type of maintenance.

Quite a high-security level, although they require a specific security circuit.

The main current variants of lithium-ion batteries are:

LiFePO4 battery

It does not use cobalt so it has greater stability and safety. It provides a longer life cycle and higher power, although with lower energy density and at a high-cost today.

lithium polymer battery

It has some improvements such as a higher energy density and a higher power. They are lighter, more efficient, and have no memory effect. Its high cost and low life cycle give these batteries, a “soft” appearance due to their lithium and polymer components, an option that is not currently very widespread.

NCM Battery

It is a lithium-ion battery, but with its cathode made up of nickel-manganese-cobalt, it achieves good values ​​of energy density, thus allowing the sale of slightly cheaper electric cars, and with good autonomy.

NCA Battery

In this case, its cathode is made of nickel-cobalt-aluminium, achieving excellent energy density and very good charging efficiency, but with somewhat lower performance at high temperatures.

solid state battery

It is also an evolution of the lithium-ion battery and has an electrolyte that is not a conductive liquid, but rather a solid conductor, thus drastically reducing its degradation over time, with a  much longer useful life. They are the  ‘great evolution’  within the different types of batteries for electric cars.

ZEBRA battery (molten salt)

They have crushed sodium chloroaluminate as an electrolyte, achieving very interesting energy and power characteristics. They have the best cycle life of all batteries, but they take up a lot of space and their power is low.

Aluminum-air battery

With a storage capacity of up to 10 times more than the Lithium-Ion type and an energy density beyond the reach of the rest, this type of battery has not had a good commercial acceptance due to its recharging and reliability problems. It is in the experimental phase.

Zinc-Air battery

Also in the experimental phase, they need to obtain oxygen from the atmosphere to generate a current. It has a high energy potential, and reliability and is capable of storing three times the energy of lithium-ion batteries in the same volume and at half the cost. According to some experts, zinc is positioned as the electrical fuel of the future.

The post Types Of Battery For Electric Car appeared first on Schmicko Mobile Car Detailing & Car Care.

Whether your trunk is small or large, there are times when you need a dose of extra storage space. The solution is car roof boxes, which allow you to travel with all your belongings safely. If you have considered buying one for your vehicle, you should take into account a series of premises, since you will find many different models on the market.

Dimensions

Depending on the dimensions, these chests can increase the capacity of your boot up to an additional 200 liters.

When choosing a box for the car roof, it must adapt to the dimensions of the vehicle, both its shape and its size. The first thing to take into account is that it fits your vehicle model because if it does not fit correctly there is a greater risk of causing an accident. In addition to increasing fuel consumption.

Once you know the measurements of your car, you should think about the shape of the hood to choose the one that best suits the physiognomy of your vehicle. So in the market, you can find the following forms:

• short chests
• mixed chests
• long chests

The choice of one or the other will also depend on the type of objects you want to transport and their dimensions. It is not the same to choose a chest to transport clothes as one to carry sports equipment or the baby’s extra gadgets.

Aerodynamics

Getting the hood to fit perfectly with the vehicle will have a lot to do with its aerodynamics. If this matches that of your car, you will be able to drive in a safer, more aesthetic way and above all with lower fuel consumption.

The aerodynamics of the hood guarantees the least possible wind resistance, in addition to achieving a balance of the vehicle due to the changes in its center of gravity when carrying more weight.

Ability

Depending on your needs, you can purchase different roof boxes. You must be careful when choosing it since one with too much capacity for a small car can cause damage to the bodywork, especially if very heavy objects are transported.

When placing it in the car, think about the fact that the luggage must always be well secured and distributed so that the heaviest objects are placed in the center. On the other hand, the chest should not be forced to introduce luggage since you could cause an accident if it opens.

To always hit the capacity of the hood, you must look at the maximum authorized mass of your vehicle and not exceed it to drive safely.

Opening

As for the opening, you can find chests with lateral, bilateral, or rear openings. The most comfortable are the bilateral ones since they allow access to all luggage from both sides of the vehicle. Although they may not be very useful depending on the type of merchandise you are transporting.

Facility

You must bear in mind that whatever model you choose, your car must be equipped with roof rack bars so that the hood can be attached to them. You have to place the chest completely longitudinal to the march. Check if it is straight or not by moving 4 or 6 meters away to get a better perspective. In the market, you will find easy-to-install chests so that you can install them by yourself without the need for help.

Which are the best on the market?

Currently, you will find many models, made with different materials and with different functionalities. We show you some recommendations on the hoods with the best features that exist at the moment according to a study carried out by the ADAC (Allgemeiner Deutscher Automobil-Club: German Automobile Club) and the Stiftung Warentest (the German consumer organization).

Thule Motion XT L

This hood obtains, according to its evaluators, a final grade of 8.5 points out of 10 since it has a very good response on the road, avoiding vibrations and aerodynamic noises. In this way, the driver can travel in a much more comfortable way in his vehicle. The main drawback of this model is its price, 559 euros.

Kamei Oyster 450

It has a score of 8.2 out of 10 and its main drawback is that it cannot be purchased in Spain since its retailer does not distribute in our country. However, if you like this model you can buy it through Amazon. Among its benefits, its results in terms of safety stand out since it is one of the most resistant and safe against an impact in the event of an accident.

Norauto Bermuda 400

It is sold in the Norauto network of workshops so it is easy to find in Spain. This one is very affordably priced and scores 7.7 out of 10. The main problem is that it is not very safe in the event of an accident, but it will be ideal when you want to use it only sporadically.

Once the chest has been chosen and placed, you can start your journey, but remember that you have added an extra load to the vehicle, so you must modify your driving to avoid damaging your car and to drive safely.

The post How To Choose A Roof Box For The Car appeared first on Schmicko Mobile Car Detailing & Car Care.